Laundry Accessories & Cleaners

At a Glance

These Washer Fill Hoses feature one male connection and one female connection with built-in O-rings. This is an accessory that can be used across several brands; check to see if your model number is compatible. These hoses can be used to fill the washer with both hot and cold water. Replacing this accessory will require basic hand tools, but no disassembly of the appliances or repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies.

At a Glance

These Washer Fill Hoses feature one male connection and one female connection. The part includes (2) high-quality 1050 PSI rubber washer hoses with (4) built-in washers. The hoses measure 5' L and feature, this is an accessory that can be used across several brands; check to see if your model number is compatible. These hoses can be used to fill the washer with both hot and cold water. Replacing this accessory will require basic hand tools, but no disassembly of the appliances or repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies.

At a Glance

These Washer Fill Hoses feature a space-saving 90-deg elbow and can be used to fill the washer with both hot and cold water. The part includes (2) high-quality nylon-braided hoses with (4) Hydro-Blue Steel anti-corrosive couplings with pre-installed EPDM washers. The hoses measure 6' L (182.9 cm) and feature a large diameter design for maximum water flow and 1700-PSI burst strength. This is an accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, but no disassembly of the appliance or repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies.

At a Glance

This Dryer 4-Way Vent Kit allows heat to safely vent from the side and bottom of your appliance during the drying cycle. This is an accessory that can be used across several dryer brands with lint screens in the front; check to see if your model number is compatible. This kit creates several placement possibilities and installation alternatives for your dryer’s ventilation exhaust. Installing this accessory will require basic hand tools and novice repair experience.

At a Glance

This Washing Machine Drain Hose measures 8' L and drains the water properly during your washer's rinse cycle. This universal drain hose is compatible with several washing machine brands and will be needed if more than the standard distance exists between the washer and the drain; check your model number to confirm compatibility.

At a Glance

Raise your washer & dryer for easier loading and unloading. An optional laundry pedestal also provides space-saving storage for detergent, fabric softener and other supplies.

At a Glance

This Gas Dryer Conversion Kit can be used to convert your natural gas dryer to use liquid propane. This is a accessory that can be installed across several 27" dryer brands; check to see if your model number is compatible before ordering.

At a Glance

Raise your Laundry Pair for easier loading and unloading. Optional laundry pedestal also provides space-saving storage for detergent, fabric softener, dryer sheets and other supplies.

At a Glance

Give the cleaning power of Whirlpool more prominence, while adding a drawer to hide away laundry supplies. Accessory pedestals add 15.5" of height for bonus storage and to help prevent bending and stooping.

At a Glance

Raise your Laundry Pair for easier loading and unloading. Optional laundry pedestals also provide space-saving storage for detergent, fabric softener, dryer sheets and other supplies.

At a Glance

This Gas Dryer Conversion Kit can be used to convert your natural gas dryer to use liquid propane. This is a accessory that can be installed across several 29" dryer brands; check to see if your model number is compatible before ordering.

At a Glance

This Washer Drain Hose carries used water from the washer to your house drain. To access the part, remove the back panel of your washer, then the lower front access panel. When disconnecting any hoses, place a towel down to catch any water. You'll need to transfer over the old clamps to the new hose. This hose has an elbow bracket, grey 90 coupler end ID is 1", and measures 56" (141.1 cm) long. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.

At a Glance

These Washing Machine Fill Hoses features (2) female connections. The part includes (2) high-quality 1050 PSI rubber washing machine hoses with (4) built-in connectors. The hoses measure 10' L and feature a universal design that is compatible with all washer models. These hoses can be used to fill the washer with both hot and cold water.

At a Glance

This Washer Outer Drain Hose Extension Kit is used to extend the drain hose so the wash water can drain to a sink, tub, or drain hole. Due to its flexible design, the corrugated hose is virtually impossible to kink, especially when comparing it to rubber hoses. The Washer Drain Hose has a larger inside diameter that makes it less likely to plug. Includes (1) 4' (122 cm) drain hose with one fitted end, (1) hose coupler and (2) clamps. This is an accessory that can be used with several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools and novice installation experience. Remember to unplug the washer or shut off the house circuit breaker before installing this part. You should also shut off the washer's hot and cold water supply before replacing this part.

At a Glance

This Dryer 4-Way Side Vent Kit allows heat to safely vent from the side and bottom of your appliance during the drying cycle. This is an accessory that can be used across several dryer brands with lint screens in the front; check to see if your model number is compatible. This kit creates several placement possibilities and installation alternatives for your dryer’s ventilation exhaust. Installing this accessory will require basic hand tools and novice repair experience.

At a Glance

The Dryer Transition Duct connects the dryer exhaust port to your home's external exhaust vent. This all-metal UL-approved dryer venting complies with manufacturer's safety recommendations and helps prevent restricted airflow.

At a Glance

This Dryer Vent Kit connects the dryer exhaust port to your home's external exhaust vent. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.

At a Glance

This Gas Dryer Conversion Kit can be used to convert your natural gas dryer to use liquid propane. This kit includes (2) burner orifices, (1) regulator vent cap and (1) LPG conversion decal. This part can be used across several brands; check to see if you model number is compatible. We strongly recommend that you hire a qualified technician to safely install this part. Replacing this part will require advanced mechanical training. Specialized tools, complex testing and appliance calibration may be required.

At a Glance

This Dryer Drying Rack attaches to the inside of the dryer drum and remains stationary as the dryer turns so you can dry shoes, sweaters and other items that shouldn't be tumbled. This accessory can be used with many major dryer brands and models; check to see if your model number is compatible.Installation of this accessory will require no tools, disassembly or repair experience.

At a Glance

This Steam Dryer Hose Kit includes the hoses and adapters needed to replace your existing steam hose assembly. This kit includes (1) brass adapter, (1) 3' (91.4 cm) hose, (1) 5' (152.4 cm) hose and (4) o-rings. This is a universal accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this accessory. Also make sure you turn off the water supply.

At a Glance

This Steam Dryer Hose Kit includes the hoses and adapters needed to replace your existing steam hose assembly. This kit includes (1) brass adapter, (1) 3' (91.4 cm) hose, (1) 5' (152.4 cm) hose and (4) o-rings. This is a universal accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this accessory. Also make sure you turn off the water supply.

At a Glance

Whirlpool® LP Gas Conversion Kit for 27" Whirlpool Thin Twin washer/dryer combinations

At a Glance

This Washer/Dryer Side Venting Kit allows heat exhaust to safely vent from your combination appliance during the drying cycle. The assembly includes (1) straight duct, (2) hose clamps with screws, (1) mounting screw and (1) clip.

At a Glance

This Washer & Dryer Stacking Kit can be used in tight spaces to place the dryer on top of the washing machine, freeing up additional room in your laundry area. Please check your appliance's use and care manual to ensure this is correct for use with your appliance. This kit includes all the parts needed to safely support the washer and dryer as well as detailed installation instructions. Installing this kit will require basic hand tools and novice repair experience. You must unplug both the washer and the dryer or shut off the house circuit breaker for the appliances before installing.